- Home /
- Bullet Blender 50DX
Extra-powerful Bullet Blender 50-DX homogenizes better and faster. Processes up to 4 tough tissue samples or up to 8 soft samples in parallel. Each sample can be up to 3.5 g of tissue or 3.5 ml. of pelleted cells combined with buffer up to 20 ml. Use TPP® or Corning® brand 50 mL self standing tube with plug-seal cap. You also receive a bead sample pack which has 7 types of beads (20 ml) , bead spoons, and a sample bag of 50 mL tubes.
Why choose the Bullet Blender?
Consistent and High Yield Results: The BULLET BLENDER homogenizer prepares up to 24 samples in just minutes. All of the samples are automatically homogenized in the same manner, with high yields, so there is very little variation from sample to sample.
No Cross-Contamination or Sample Loss: There are no probes or blades to cause cross contamination or sample loss, which also means there are no parts to clean between runs. The sample tubes are kept closed and self-contained during homogenization.
Samples Stay COOL: No cool down required. There is very little heating of the samples because the sample tubes vibrate vigorously in air, keeping them cool as the Bullet Blender applies rapid bursts of agitation. Many of our competitors’ bead mill homogenizers require cool down periods because the samples heat up because of limited air exchange to keep them cool, and/or continuous high frequency agitation. The Bullet Blender’s unique, elegant design also means that the motor does not need to agitate any heavy platforms or plates. Thus the Bullet Blender uses very little power, further keeping the samples cooler, and it will last for many years. Early units from 2006 are still in use.
So Easy To Use: Simply place your sample, beads and buffer in standard tubes, and load the tubes into the BULLET BLENDER homogenizer. Tune the extent of disruption by adjusting the run time and speed. Afterwards, place the sample tubes in a centrifuge to separate the lysate. No special holders are needed. There are no clamp plates nor locking rings to fiddle with.
Risk Free Purchase: BULLET BLENDER homogenizers come with a 7 day money back guarantee and a 2 year warranty. The simple, reliable design enables the BULLET BLENDER to sell for one half the price of other agitation based instruments, yet provides an easier, quicker, cooler technique.
- SAMPLE SIZE: Large (100 mg -3.5g)
- COOLING: 4°C Cooling
- COMPATIBLE TUBES: 50ml. snap cap Tubes
INCLUDES THE FOLLOWING:
- BULLET BLENDER 50
- Operator's manual
- 24V DC Wall plug power supply (UL/CE)
- Basic starter kit which includes:
- Bead Sample Pack contains each of eight different bead types.
- Spatula and spoon for dispensing beads
- Sample pack of 50 mL TPP brand tubes
|Homogenization of up to 12 samples from 100 mg – 1 g (100 µl – 1 mL for plant tissue, insects and cell culture) in 5 mL Eppendorf® tubes|
|Homogenization of up to 12 samples from 100 mg – 1 g (100 µl – 1 mL for plant tissue, insects and cell culture), for wet or dry grinding in 5 mL Axygen® tubes|
|Homogenization of up to 8 samples from 100 mg – 3.5 g (100 µl – 3.5 mL for plant tissue, insects and cell culture) in 50 mL tubes|
|Range of speeds allows for gentle vortexing, vigorous homogenization, or anything in between|
|Can be used in temperatures ranging from 4°C to 40°C*|
|With Air Cooling to keep the inside of the instrument near ambient temperature|
|With 4°C Cooling™|
|Made in the USA|
By Sample Type
|Cultured Cells||Organ Tissue|
|Plants, Algae and Fungi|
|Protein Extraction/Analysis||Nucleotide Extraction|
|Viral Extraction||Organelle Extraction|
|Bacterial Isolation||Small Molecules / Chemical Analysis|
|Generating Single Cell Suspensions for Re-inoculation||Nanoparticle/Liposome Generation|